• Welcome to the Land Rover UK Forums

    You are currently viewing the site as a guest and some content may not be available to you.

    Registration is quick and easy and will give you full access to the site and allow you to ask questions or make comments and join in on the conversation. If you would like to register then please Register Now

200 tdi

  1. Grogu

    Quick question Series 3 200tdi

    Hi, does anyone know if a 200tdi will fit through the back door of a series 3? potentially collecting one at the weeked and trying to work out how to transport it! Cheers
  2. Grogu

    200 Tdi into a series 3 109

    Hello internet, Currenty doing research into putting a 200tdi into my series 3 109, it does not have its original engine so no issues with originality. I am not worried about noise in the cab, i already wear ear defenders while driving. a little power increase and considerably more MPGs is what...
  3. Z

    Away from home with a new noise! What is it and should I worry about getting home..?

    Towards the end of a long drive my 200TDI started making a new sound. It’s not a whining sound but it is higher in pitch than the engine noise. It’s quite loud, and the pitch increases with the speed of the vehicle so I think it has to be after the gear box rather than a noise from the engine...
  4. M

    Fairey overdrive rebuild / will it survive a 200tdi

    Hey guys, i have seeked help because of my overdrives input gear some time ago and finaly found one :) Now i want to start the rebuild with the synchrogearboxes parts kit however i am a bit sceptical about the synchro unit since it looks like it is propperly worn down (but i am nor sure) this...
  5. D

    Help - Front drive - CV joint

    Hi I have a defender 200tdi (RHD). Recently lost power in front drive (2 days before MOT). I get drive back in diff-lock so clearly an issue with front drive. In fairness i was about to check the CV joints anyway due to "knocking" sound when cornering. Put it on stands and found nearside CV...
  6. mazzofab

    200/300 Tdi turbo replacement

    I need to replace the turbo on my 200tdi Defender. Is here any replacement that will be a straight fit int? What options do I have, maybe by buying a replacement from a scrap yard? Also, I have the same problem with a 300 tdi so same questions apply. Thanks and regards to all!
  7. S

    200 TDI difficult to start

    Hi, I found a used 200TDI engine and I fitted it my 109. I have changed timing belt and some oil seals. There was few issues with Starter motor solenoid and it was fixed. But it this 200TDI very difficult to start. pls find the below steps that I have to follow before start. 1. Must have...
  8. N

    evening ppl some advice please

    hi been working on the disco last month we put a new cam belt on and replaced push rods that got bent, done the timing and checked tapit gaps however still having an issue with smoke and acting like battery is dead unless you start it by spanner on the starter. Any ideas please sorry j reg...
  9. series3mad

    200tdi t28 turbo upgrade

    I've seen many people mention the the fitment of a garrett t28 turbo to their 200tdi, but here at so many different turbo a/r 's, turbine and compressor sizes. so which one/s are the best for low speed, cruising and flat out operations?
  10. S

    Stolen Landrover 90 from West Sussex

    Taken in the small hours of 24th November, from Haywards Heath, West Sussex Light Blue, E145 EFG, 200 tdi Any info please contact, many thanks for reading
  11. Ginyons Kernow

    Newbie: Buying an S3 with 200TDi

    Dear All, Firstly, as a newbie, the mandatory thanks. I have spent hours now reading through these forums and they are just excellent, for learning and general opinion. I AM well aware the S3 and 200TDI issues are found everywhere here but I have just viewed a beauty S3 and thought some of your...
  12. B

    where to start?

    hi guys thinking of buying a defender 90 station wagon but don't really know where to start i have a budget of about £4000, i have been looking at the 200 tdi but don't really know what to look for (bad and good points)telltale signs that something is wrong or common problems. any info would be...
  13. Pete H

    Valve Clearances 200/300 TDi

    Tools needed: 1/2 inch ratchet 1/2 inch breaker bar 1/2 inch ring spanner 8mm socket 13mm socket 27mm socket 32mm viscous fan spanner Flat blade screw driver. To do this job you will need to remove the top radiator hose (you will lose a little coolant), also you will need to remove the hose...
    • Pete H
    • Resource
    • 200 tdi 300 tdi clearance valve valve clearance
    • Category: Guides
Back
Top Bottom