• Welcome to the Land Rover UK Forums

    You are currently viewing the site as a guest and some content may not be available to you.

    Registration is quick and easy and will give you full access to the site and allow you to ask questions or make comments and join in on the conversation. If you would like to register then please Register Now

bearings

  1. Naks

    How Do I? Body-on TDV6 removal & teardown

    Chap pulls the engine out of a D3 body-on with a view to line-boring the engine after spun bearings. part 2, where he line bores the engine block
  2. D

    LT230/BW Transfer Box Questions

    Evening all... I have been reading on tinternet and it has made me wonder... I have a 93 Vogue and I am convinced she has an LT230 Box (E). Now here's the thing, she has just the H-N-L selection (No Right to lock the diff). So, is this a transplanted LT230 and no dif lock connection, cause...
    • Doss
    • Thread
    • bearings borg warner dif lock lt230
    • Replies: 7
    • Forum: Range Rover
  3. greenbert

    Oily brakes

    SIII, 88, 1976 I was pottering around under the car today, and noticed fluid had been leaking / dripping onto the inside edge of the nearside rear tyre, and appeared to be coming through the gap between the hub and the brake drum. Suspecting a brake cylinder leak, I removed the brake drum...
  4. nighthawk

    Rear Hub Oil Seals And Bearings On 300TDi Defender 90

    Defenders have a breather pipe on the top of the longer half of the axle casing. If it is blocked, pressure might build up causing oil to be forced out past the seals, giving the same symptoms of a failed hub oil seal. Clearing the breather pipe is simpler than dismantling the hub so it is a...
    • nighthawk
    • Resource
    • 300tdi bearings defender defender 90 hub oil oil seals rear rear hub seals
    • Category: Guides
Back
Top Bottom