• Welcome to the Land Rover UK Forums

    You are currently viewing the site as a guest and some content may not be available to you.

    Registration is quick and easy and will give you full access to the site and allow you to ask questions or make comments and join in on the conversation. If you would like to register then please Register Now

bleeding

  1. A

    Series 3 Clutch not pushing fluid into pipes

    Hi everyone, need some help with a series 3 clutch. Im restoring an old series 3 (havent run in 15 years) and have now began looking at the clutch. Pedal felt completely soft with no resistance at all so checked fluid level and it was very low. I topped off with new fluid and loosened the bleed...
  2. K

    How Do I? Disco 2 ABS brake bleed

    My pedal suddenly went mushy. Brakes still worked, but pedal was a too long for comfort. Took off the master cylinder and re-built it but could not get a pedal. Replaced cylinder - same problem. Procedure followed was a manual bleed in the traditional manner followed by a power bleed as per...
  3. W

    My bleeding problem (300 tdi)

    Hope someone can help? As my fuel lift pump on my Disco 1 300tdi is not (apparently) working, to bleed the fuel after changing the fuel filter i am simply filling the filter up before fitting and then topping up fuel through the bleed screw hole. This suggestion (except last bit) i took from an...
  4. S

    Landrover Discovery 300 TDI clutch system problems please HELP!

    Hi ok i had a little bit of clutch sum days and alot of clutch other days so i undone the bleeding nipple and i did it back up could not get any clutch at all after that so put it down to master cylinder or slave cylinder changed both still got no clutch put bleeding kit on and bleed the clutch...
Back
Top Bottom