• Welcome to the Land Rover UK Forums

    You are currently viewing the site as a guest and some content may not be available to you.

    Registration is quick and easy and will give you full access to the site and allow you to ask questions or make comments and join in on the conversation. If you would like to register then please Register Now

cam

  1. P

    DSE cutout at speed - Timing clain?

    It's done nearly 200k miles, today on the motorway the EML came on and the engine cut out. I didn't hear anything when it happened. On starting it turns over fast and sound like lack of compression, so I figure one of the chains has broken. What damage should I be expecting when I go digging...
  2. N

    evening ppl some advice please

    hi been working on the disco last month we put a new cam belt on and replaced push rods that got bent, done the timing and checked tapit gaps however still having an issue with smoke and acting like battery is dead unless you start it by spanner on the starter. Any ideas please sorry j reg...
  3. Walterburke

    Sherpa timing kit

    I have a Series 111 fitted with a 15J sherpa 2.5 n/a diesel engine. Where would i find a timing kit, there are belts on ebay but no kits, not available from usual land rover parts suppliers, I dont have part numbers either. I dont want to take off the existing belt until I have a replacement as...
  4. oil dripper

    One man and his 90 live landy cam

    looks like he,s having fun,bit hit or miss when he,s on air but its a live feed http://www.livestream.com/badgerset
  5. M

    wear on camshaft advice please

    I have just been told by my mechanic who I feel I can trust, that after replacing injector seals on my 03 td5 with 110,000mls . On doing this job he tells me he has identified excessive wear on the cam shaft. Apparrently very common. So much so, that he has recommended I get shut of the vehicle...
Back
Top Bottom