• Welcome to the Land Rover UK Forums

    You are currently viewing the site as a guest and some content may not be available to you.

    Registration is quick and easy and will give you full access to the site and allow you to ask questions or make comments and join in on the conversation. If you would like to register then please Register Now

front

  1. P

    droning noise after replacing front propshaft on discovery II

    Hi New here so be gentle! Had a recent front propshaft failure (at 70 on a motorway, woke us up!!). Anyway had the propshaft replaced with new and underside damage repaired but have a droning sort of sound at 75ish. Does the propshaft need to be balanced are as I have read can it be rotated 90...
  2. B

    Disco Front Window problems

    Ok Guys I am a landrover novice so (3.9 V8 M reg beast) I have read the threads about the windows, I even tried the fix where you solder the ECU. This worked great, however only fixed the back windows (Back never worked since i got it, the front ones did to start with) , the front windows do not...
  3. M

    Terrafirma Big bores catching Help Please!!

    I have just fitted some Terrafirma Big Bores to the front of my Defender 110. They are STD height and I have also fitted STD Terrafirma Shock Turrets. The offside shock does not fit straight and as the suspension compresses it catches on the spring perch on its way into the turret. Can't see...
  4. P

    Front Wind Screen Element not working

    Hi All, I have a 2006 90 TD5 XS with a heated front wind screen. Hasn't been a problem until the recent bout of cold weather, but the element doesn't appear to be working (not demisting at all). It used to clear up in seconds but now it doesn't have any affect at all. I've checked the...
  5. M

    Mounting 4 Point rear harness

    I have recently fitted an Exmoor Trim rear front facing seat to my semi converted 110 van. My question is weather it is satisfactory to bolt the seatbelt/Harness to the tub floor. Is it strong enough? Regards Matt
  6. Gas Gas Ohlins

    Repair Guide Replacing Front Discs And Pads

    1.Lift the bonnet and loosen off the brake fluid reservoir top. This will relieve pressure in the braking system when it comes time to lever out the brake pads before removal. 2.Loosen off wheel nuts, jack up LR, lower axle onto axle stands and remove wheel...this is what you'll see...the...
  7. Satancom

    Repair Guide Changing A Front Half shaft

    Changing the front half shaft is quite an involved job, made worse in my case by having free wheeling hubs installed. Although without the FWH's I wouldn't have been able to get home so they can stay. More often than not the shorter half shaft snaps first, so if your unsure which side has gone...
    • Satancom
    • Resource
    • changing front half shaft
    • Category: Guides
Back
Top Bottom