• Welcome to the Land Rover UK Forums

    You are currently viewing the site as a guest and some content may not be available to you.

    Registration is quick and easy and will give you full access to the site and allow you to ask questions or make comments and join in on the conversation. If you would like to register then please Register Now

spare wheel mount

  1. ncompass

    Rubbing strip-spare wheel retention

    I'm rebuilding a S3 88 - Page 2H02 in the Parts Catalog suggests I need 2 x Rubbing strip for Spare wheel retention... part no. 330212, and 6 rivets. I now have the stripes and they seem widely available, but I cannot see where they need to go? I have an old rotten one, so I know they were on...
  2. Bigbananafeet

    In a little trouble fitting Mantec swingaway wheel carrier.

    I'm half way through fitting my shiny new Mantec swing away spare carrier to my shiny new back door and I've hit a wee problem. The instructions say to fit the plate (one that the piston bolts to) to the original fitting for the old plate. My problem is that the new door is just plain blank...
  3. hrothgar

    Wolf spare wheel mount

    Can anyone tell me how the spare wheel is mounted on a soft-top TUL Wolf? I have an ex-MoD 90 with a Wolf roll cage and tilt, but the spare on the bonnet. In the tilt there are 2 flaps, one each side, behind which is a round opening, roughly at the spot where the centre of the spare would be if...
Back
Top Bottom