• Welcome to the Land Rover UK Forums

    You are currently viewing the site as a guest and some content may not be available to you.

    Registration is quick and easy and will give you full access to the site and allow you to ask questions or make comments and join in on the conversation. If you would like to register then please Register Now

Driver door lock barrel problem

alan drover

In Fourth Gear
Can anyone please tell me if you can buy separately the grey plastic whajamecallits that fit to the end of the drivers door lock barrel and operate the lock/solenoid linkage and the alarm microswitch? I think there are two of them on my '95 300, one for each function. The lug has broken off both of them meaning the key just turns the barrel and nothing else! I have one from an earlier vehicle, but it doesn't seem to be the same size.

The reason it broke is probably because the key was very stiff to turn when unlocking the door. I guess this is probably the linkage, because the inside button seems to operate the solenoid fairly easily. Any suggestions, apart from WD40?

Of course I could ring my local LR dealer, but you guys are so much more knowledgable.......

Top Bottom