-
Welcome to the Land Rover UK Forums
You are currently viewing the site as a guest and some content may not be available to you.
Registration is quick and easy and will give you full access to the site and allow you to ask questions or make comments and join in on the conversation. If you would like to register then please Register Now
Fairey Free Hub spares
- Thread starter DervMan
- Start date
I think you might be struggling to get a 'new' one.
Probably you'll need to be looking for a replacement hub for the spares you need.
Probably you'll need to be looking for a replacement hub for the spares you need.
fergie2035
Big Landy Fan
Forgive my confusion but do you mean the Fairey "dome" type cast aluminium hubs?
Its just running in my mind that I've heard the Superwinch ones referred to as Fairey hubs too. I have a pair of the Superwinch ones lying about, one knackered and one good. If it was that type you needed you could have those if you want.
If its the domed aluminium type where you turn the whole cap I can't help. I've got that kind on my swb but have no spares for them.
Its just running in my mind that I've heard the Superwinch ones referred to as Fairey hubs too. I have a pair of the Superwinch ones lying about, one knackered and one good. If it was that type you needed you could have those if you want.
If its the domed aluminium type where you turn the whole cap I can't help. I've got that kind on my swb but have no spares for them.
Aye, its the domed type, with the nylock fixing strip. Not the same as superwinch ones at all, I dont think. They look like the warn ones, with the turny bit in the middle dont they? (there's technical now...'turny bit'
)
)
fergie2035
Big Landy Fan
I was getting mixed up with the Fairey company later becoming known as Superwinch. Or so the overdrive manual says.
I have a small collection of FW. hubs..Can you post a picture of the one you are after.
Cya
Mungo
Here you go Mungo.
It's number 4 that I need, the Actuator Assembley.
Thanks
It does say that right enough, but I think the superwinch hubs were like the ones Mungo posted up. I know that people have been looking for the service kits for these Fairey hubs for a long time, and they are simply non existant. That was why I took them off our III, and fitted the WARN ones instead...we stripped one set a few years ago, and got the passenger side off fine, but the nyloc strip was broken in the passenger side, and the only way to get the thing off was to use the grinder. (should have saved the bits, shouldnt I?)
Well done that man! A good price too.
Did you ask about the service kits as well? The O rings, and the nyloc thingy?
A good price too.Did you ask about the service kits as well? The O rings, and the nyloc thingy?
fergie2035
Big Landy Fan
Hmmm. ... parts are available then. That's good.