• Welcome to the Land Rover UK Forums

    You are currently viewing the site as a guest and some content may not be available to you.

    Registration is quick and easy and will give you full access to the site and allow you to ask questions or make comments and join in on the conversation. If you would like to register then please Register Now

For V8 90 & 110 Owners

icedmunkie

icedmunkie

Offroader
I am fitting my V8 into the 90 shortly, it was a 2.5 td.

I cut the old td mounts off and measured where my friends V8 mounts were but lost the bit of paper just wondering if somebody here can measure where I need to weld the mounts on.

1. Front of the chassis
2. How high from the top of the chassis do they sit.
3.How far away from the bottom of the chassis do the sit

Any other useful measurements would be grateful.

Munkie
 
will try to look tonight, since i will be under it anyway.
do you need distance from front member also?
 
If its any help i live in West Sussex BN 11 you are welcome to come around with your measure ,take photos etc . I have a 1992 110 V8 .
 
HoSS said:
will try to look tonight, since i will be under it anyway.
do you need distance from front member also?
Click to expand...

Cheers that be grand, I think I measured that last time but not sure...

DJGG Check your PM's mate. Be good if I can look at another one thats local.

You must live near the hospital?
 
Back
Top Bottom