• Welcome to the Land Rover UK Forums

    You are currently viewing the site as a guest and some content may not be available to you.

    Registration is quick and easy and will give you full access to the site and allow you to ask questions or make comments and join in on the conversation. If you would like to register then please Register Now

Ignition wires??


Big Landy Fan
The battery positive cable and the thick brown cables from the alternator and to the dash/fuse box conect to the stud terminal. The white wire with red stripe from the ignition switch connects to the spade terminal - its the solenoid energiser circuits from the ign switch start position

I took the wires off the ignition switch (making carefull note of where to put them back) and found that there is letters next to the spade terminals, these are, 'A', 'H', 'ING'
and 'S&T'. The book of words with the wireing diagram and snagger say that the red and white wire should be connected to terminal '3' of the ignition switch. The truck has a starter button wich is connected from the battery to the larger terminal on the starter solenoid.

So basicaly the question is which terminal on the ignition switch is '3'?

Thanks for your help

Top Bottom