• Welcome to the Land Rover UK Forums

    You are currently viewing the site as a guest and some content may not be available to you.

    Registration is quick and easy and will give you full access to the site and allow you to ask questions or make comments and join in on the conversation. If you would like to register then please Register Now

Induction

GPeppos

In Third Gear
On my Freelander 2000 model, I was thinking of removing the air filter element and attaching an induction kit on the air flow meter cause that is where the air box is attached, now the thing is that i could only find some for the 1.8 petrol model and personally I own the L series 2.0 diesel. What to do? There should be no down side cause the mapping is done from the ecu and well basically no calibration will be needed, so the engine will not run lean.

Another issue is this has anyone heard of and installed a hiclone, (for more detail visit http://www.hiclone.co.uk/land_rovers/index.html ). Looks promising.
 
Last edited by a moderator:
Back
Top Bottom