• Welcome to the Land Rover UK Forums

    You are currently viewing the site as a guest and some content may not be available to you.

    Registration is quick and easy and will give you full access to the site and allow you to ask questions or make comments and join in on the conversation. If you would like to register then please Register Now

General Propshaft U/j advice.

mmgemini

Big Landy Fan
For those of you that do your own servicing and have found that it's impossible to get a grease gun end onto the u/j grease nipple,try this.

Get a long grease nipple,remove the original grease nipple and discard.
fit the long grease nipple and grease.
Remove the long grease nipple and fit an allen screw into the u/j.
Job done!!!
Keep the long grease nipple in your tool box for each service.

There's two different thread sizes.You wont know which one you need until you remove the grese nipple.

My long grease nipples came from Difflock.

www.difflock.com
_________________
 
Last edited by a moderator:
Back
Top Bottom