• Welcome to the Land Rover UK Forums

    You are currently viewing the site as a guest and some content may not be available to you.

    Registration is quick and easy and will give you full access to the site and allow you to ask questions or make comments and join in on the conversation. If you would like to register then please Register Now

series 2a divided/spilt rims


Accelerating Away
:) Hello folks, I am looking for a "torque wrench setting" for the divided /split rim nuts on Series 2a 16 inch wheels. Any ideas?
Regards Billy
Hello Billy

I don't know if this is exctly what you are looking for but according to the 101 service manual the wheel nut torque settings are 75 to 85 lbf ft.

Keith Hart
Thanks for the reply photo,but it is not the "wheel nuts" I am talking about. It is the outer ring of nuts that hold the two halves of the wheel rim together:)
If as I am told these are the same as 101 FC,any further clues?

Ah! That is where the confusion comes from - the 101 doesn't have split rims, but it does have the 'step' on the front rims.

Keith Hart
Top Bottom