• Welcome to the Land Rover UK Forums

    You are currently viewing the site as a guest and some content may not be available to you.

    Registration is quick and easy and will give you full access to the site and allow you to ask questions or make comments and join in on the conversation. If you would like to register then please Register Now

Toppa's dumb question of the day...

toppa

toppa

Posting Guru
I need to replace the uj's on my rear prop, i know there is two sizes, so last night i removed the prop and tonight i removed one of the uj's to measure siae uj, now will both be the same size on the one prop????


Cheers
 
Excellant, cheers guy's..

It measured 7.5cm form end of cup to end of cup, i assume this is the measurement that varies?


Cheers
 
toppa said:
Excellant, cheers guy's..

It measured 7.5cm form end of cup to end of cup, i assume this is the measurement that varies?


Cheers
Click to expand...


Yup! you are learning quickly my boy :D

Don't forget however that a badly worn yolk and cups might be several millimetres out :rolleyes: .

There is about 5mm difference between sizes on the 2 x types of new ones.
 
toppa said:
I need to replace the uj's on my rear prop, i know there is two sizes, so last night i removed the prop and tonight i removed one of the uj's to measure siae uj, now will both be the same size on the one prop????


Cheers
Click to expand...

They :p SHOULD :p both be the same. Notice the word :eek: SHOULD :eek: because on another forum somebody has a prop with different sized u/j's.:D
 
the securing nuts/bolts (prop to diff) are different from the securing nuts/bolts (prop to transfare box).
well , they are on my 90.
 
Back
Top Bottom