• Welcome to the Land Rover UK Forums

    You are currently viewing the site as a guest and some content may not be available to you.

    Registration is quick and easy and will give you full access to the site and allow you to ask questions or make comments and join in on the conversation. If you would like to register then please Register Now

Wiper part no's reqd.

HarryD

Overdrive!
Is it possible to replace inividual parts on a wiper motor/assembly?
Looking for the ball to socket assembly/piece that mounts mid point along the wiper assembly and links n/s with o/s wiper.
Also, the small socket that fits in the end of the horizontal bar and then onto the ball assembly as above.

If anyone knows of the part no's I would be obliged.
 
Found it.
DLS100100 for the link assembly (£57.14 + vat)
Whole assembly is DLB101500 (£125+ vat)
Tested motor and that's ok so replacing the assembly today.
Part nos left here for ref if needed.

Above are main dealer prices.
 
Is it possible to replace inividual parts on a wiper motor/assembly?
Looking for the ball to socket assembly/piece that mounts mid point along the wiper assembly and links n/s with o/s wiper.
Also, the small socket that fits in the end of the horizontal bar and then onto the ball assembly as above.

If anyone knows of the part no's I would be obliged.

Hi Harry,

Yes, please see post #3of this thread.:D :D :D :D
 
Found it.
DLS100100 for the link assembly (£57.14 + vat)
Whole assembly is DLB101500 (£125+ vat)
Tested motor and that's ok so replacing the assembly today.
Part nos left here for ref if needed.

Above are main dealer prices.

The Freelander was sorted by me the day after the prices were posted here. Was easy enough, but the only problem was getting the wipers to travel and park over the correct area/pattern. Was often 90 or 180 degrees out. Takes a bit of figuring out, but got there eventually. No problems since.
 
Back
Top Bottom