Paul TD5 XS 90
Overdrive!
To replace the lamps in the air conditioning controls, remove the speaker below it (4 x posi drive screws)
Now you can put your hand up and push the control out of the lower dashboard.
Unplug the 2 electrical sockets
Now you can prize the rear of the switch from each housing by releasing the 4 white plastic clips
The small 3mm diameter lamp is soldered onto the two uprights, de solder it and fit new lamp, solder connections, clip back together and re-fit into dashboard
The temperature control has a blue lamp, the fan speed has a green lamp.
The lamps are ones with 2 long steel connections and about 3mm diameter & 6mm tall, heaight not an issue loads of room.