• Welcome to the Land Rover UK Forums

    You are currently viewing the site as a guest and some content may not be available to you.

    Registration is quick and easy and will give you full access to the site and allow you to ask questions or make comments and join in on the conversation. If you would like to register then please Register Now

bolts

  1. ER1C

    How Do I? Winch Bolts Torque

    Upon towing a shepherds hut up a hill the winch suddenly started slipping, for the first time ever it couldn't hold a weight and as soon as I wasn't winching it was pulling back unspooling the drum.. Following a chat with Goodwinch (Goldflish 9.5 winch) I have adjusted the brake as they have...
  2. M

    Series one Discovery axles . . .

    Hi all. I am in the process of fitting Discovery axles to the 58' Series 1, and being as i will be using these axles in combination with standard springs (as opposed to parabolics) i need some very long U-bolts. Does anyone know what the longest U-bolts available are, without having to make...
  3. R

    Steering Box Fixing Bolts

    Hi, Got a 'Red' at last MOT one my 'new' 90 ,because Steering Box Mounting Bolts were loose, turns out they must been loose for ages as the bolts are chafed on the shaft so need new set, anyone know the part number? or spec? Thanks Roy
  4. H

    D3 Rear Chassis M14 bolts for fixing tow bar side arms missing.

    Hi All, I fitted a Witter Tow Bar to my D3 today, but could not fit the side arms. This was because the M14 bolts were missing from the Chassis! The Witter instructions say: "Remove M14 Bolts (x) from the inner faces of the chassis". These are the bolts that are missing. Does anyone have...
  5. U

    Series Bonnet Mount Spare Wheel Bolts

    Hiya I've just picked up a Series 2A Bonnet which I've cleaned up and fitted Series 3 Hinges to (see pic). Before: After: I've got the little Z-shaped clamps which hold the wheel in place, but I have no idea what size/type of bolts actually hold the clamps and spare wheel onto the...
  6. dumdums

    Series 3 nuts, bolts and fixings!

    This is a plea to someone who has, while restoring their prized Series 3 88 replacing all the rusted and worn fixings, and listed them on a piece of paper for reference. I am in the process of bring my own Series 3 back to glory, and as it is used every day I am finding it difficult to remove...
  7. hawkinz69

    How Do I? Range Rover p38 4.6 engine removal

    Hello, I could do with some expert advice in removing the V8 engine. The engine and engine bay has been stripped so all that remains is the block with crank and cam still in. My problem is with the bell housing bolts, what is the best way of removing these damn bolts!! I am removing the...
  8. Big Sandy

    Products Explained Nuts And Bolts Explained

    It is easy to get confused when buying nuts and bolts. There are a plethora of different types available. Not just the style of them, for example; coach bolts, set screws, machine screws, to name a few, but what size they are. Hopefully this should help you find what size of bolt and nut you...
Back
Top Bottom