Help needed please

[Davidb8080]

Hi, I have a Range Rover l322 2010 3.6 TD vogue. Have fitted new after market air compressor for suspension.All fitted ok apart from the hose that goes from valve block to compressor, has a different connector/fitment on the compressor side which is white plastic. Can any advise me what to do to fit the hose. Many Thankyous

 

[gstuart]

Hi, I have a Range Rover l322 2010 3.6 TD vogue. Have fitted new after market air compressor for suspension.All fitted ok apart from the hose that goes from valve block to compressor, has a different connector/fitment on the compressor side which is white plastic. Can any advise me what to do to fit the hose. Many Thankyous

Hi

Not wishing to try and teach u how to suck eggs but that white plastic plug is just to hold the olive in place , if u remove that , push ur pipe in and nip it up with a spanner, also best to use inserts when using Voss compression fittings

Must confess due to the expense I replaced all my Voss connectors with brass push fits , found them a lot easier to use and work very well

Hope that helps