Thanks Big sandy, will have a look see.Welcome to the forum!
The seat bases, backs, and base frames are on this page.
Front Seats & Cushions for Land Rover Series 2, 2A and Series 3 - Paddock Spares
Buy Front Seats and Cushions for the Land Rover Series 2, 2A and Series 3 at Paddock Spares. Browse our Land Rover Series Parts and order online.www.paddockspares.com
Basic seat bases is what it would have had, but they would have been much better quality than those above. If you're into spending money, have a look for "Exmoor Trim".
The Paddock link doesn't include the seat rails that screw to the seat box, onto which the seat frames are fixed, and into which the seats sit.original front seats and hardware
Sometimes your budget has to stretch further than some of these suppliers lead you to believe. You think you can get away with something a bit cheaper but in the end you buy the junk and then the proper stuff and yes... you've spent double. It can be a hard lesson. I know because I'm continually learning it myself...i brought a set of seats from Craddocks thy look ok but move around on the bases as no fixings, i should have looked at all the options first, Exmore trim is the way to go if your budget stretches that far
Parts book details; excuse the tea stains.what the original front seats and hardware looked like for a series 11A.
This is excellent and exactly what I have been looking for, thanks a lot. Now I just have to source the mounting hardware & rails, Best regards PeterParts book details; excuse the tea stains.
View attachment 528088View attachment 528089
I trust that Series G will not object if I copy a photo from his excellent S2A restoration thread; outer rails have the adjusters, centre rails do not; well worth reading, and you will find plenty more useful photos.
View attachment 528090
Feeling flush, Pete?source the mounting hardware & rails
Looks like somebody snapped that up.Feeling flush, Pete?
To be fair, it is a complete set and slightly cheaper than if bought individually.
Land Rover 88 109 Series 2 2A 3 Front Seat Frames full set | eBay
removed from a 1969 series 2a, adjustable frames for driver and passenger seats and frames for centre seat mountingwww.ebay.co.uk
Yes, that was meLooks like somebody snapped that up.
The fixings are easy to find but you may prefer to use sherardised or SS. Get sherardised from Tony at LR Fasteners or Rob Maude at LROE. I had a chat with Tony a while ago and he told me that sherardised was standard on the S2.Yes, that was me
yes that was what i thought .. but am damned if i can find a part number as such .. if i can not find a part number . i will make a bracket .. and maybe a rubber block to fit on the seat cushion base .. thanks for the reply...Mine had a bit of L section screwed to the seat base to butt up against the little stop tabs.
The strap then made sure the front of the seat couldn't 'jump' over it.
Same. L section about half inch wide, one at each front corner.Mine had a bit of L section screwed to the seat base to butt up against the little stop tabs.
The strap then made sure the front of the seat couldn't 'jump' over it.