Hello,
I’m trying to fit the steering box, following a rebuild.
The steering drop link arm nut tightens up ok but there is a seemingly large amount of spline left. (See pic)
Is this normal? Looks odd to me.
Torque spec is 60 - 80 ft lb, so not massive.
I’ve pulled the rod back off and cleaned the splines with a small triangular file etc.
Still seems to sit far out… any ideas?
Thanks
I’m trying to fit the steering box, following a rebuild.
The steering drop link arm nut tightens up ok but there is a seemingly large amount of spline left. (See pic)
Is this normal? Looks odd to me.
Torque spec is 60 - 80 ft lb, so not massive.
I’ve pulled the rod back off and cleaned the splines with a small triangular file etc.
Still seems to sit far out… any ideas?
Thanks